Question Locked

Networking XP hardwired with VISTA wireless

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a home network using a Linksys WRT54G Version 6.
Conditions.
2 XP desk tops direct attach
1 Win98 old lap top wireless attached.
replacing old lap top with new running VISTA

Old lap top worked fine, could access the internet and share files with every machine and access printers.

Installed new VISTA powered lap top, set up access and can access internet. Still can not see or use file or printer sharing from this new lap top. It is all set up as per insturctions.

Installing Lynksys easy network advisor on my desk top and the new lap top shows everything is ok. I can see the who network from either direction. (this is from the router point of view.

When trying to use the start \\device name
to set up the attachment it is refused saying the network I was trying to attach to is public.

Both sides are set up as private, both have the same workgroup name etc.

Any one any suggestions as to what will allow this network to work together. PS.. the EP portion still works fine as far as file and print sharing goes.

Harry

4 replies

by triathlete1981

this in one breath without editing afterwards.

The who network? Not familiar with that model Linksys, but file and printer sharing is basically the same. And what instructions are you talking about? If you share a folder on each XP machine, can you access the share from the other XP machine?

Set up what attachment? Run ipconfig on each machine and make sure they are getting private IP addresses from the router. You set up the Linksys for DHCP to hand out internal addresses on the same subnet?

Also, if this is a workgroup, does each computer have an account that has permission to see shares on the others?

by home585

I have found and fixed the problem.

I was running Zone Alarm and had made the necessary set up adjustments to it, but in the process of upgrading my Norton Anit-virus software, by mistake I installed Norton Internet security, which also has a fire wall. When I turned off Zone alarm and made the set up changes to Norton all worked fine. Thanks again for you support. Harry

This discussion is closed to new replies.