Discussion Locked

New HP 6730 Celeron - No Sound?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My Mother just bought this Hewlett Packard 6730 Celeron Processor, Win98se, and has no sound when a card is with music, etc. Her Callwave internet answering machine is working properly, and she gets the start up giggles coming through fine on the external speakers. Could a sound card be missing or something? Is it a setting that is off? I need some input before I tell her what to do. She is 65 yrs. old, bless her heart!

7 replies

by dmiles

Godiva,
Sound problem are hard to determine from one machine to the next,first make sure that the lines are connected properly,follow the manual for speaker connection.
Click Start>Programs>Accessories>Entertainment-click on the volume control andmake sure that it is not set on low volume also if their is a CD Rom in the list-click on it and when the facing comes up make sure the mute box is unchecked.
If nothing else try troubleshooting help menu
Hope this helps

by otl

Just a thought as my system has several different controls for the sound.

1 Master audio mixer
2 CD player
3 Wave player
4 MIDE player

Make sure none of them has mute on!!!

by cscnet

All of the previous answers are good advice and will more than likely be your problem. But since they have already been said, here is a few other, less likely, suggestions. Check device manager and see if you see any exclamation points. Right click on "my computer" and click "properties". If so call the HP help line, since it is a new machine. Call the HP help line on this they can walk you through checking resources, upgrading, or maybe reinstalling drivers.

Also different formats of audio can do different things. But, if a sound card was missing you wouldn't hear anything, I think it is built on the motherboard on an HP anyway.

Also I am not sure what you mean by music. If you are talking about Audio CDs try plugging a headphone set (you can also use your speakers) in the jack on the front of the CD ROM drive (most CD drives have a jack here but not all). Then try to play the CD. If this works the analog cd audio cable on the inside may have been left unplugged at the factory.DONT TAKE THE CASE OFF i assume that would void your warranty. Call the HP tech support, and explain what you have found. I hope you get it goin.

This discussion is closed to new replies.