Question Locked

New Mobos keep failing after short usage

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Building a new system with 8600GTS, Intel 6750, mfg spec Kingston DDR2. Using Asus PN532-E SLI Plus MPCB. First one worked 40 minutes, was using Corsair 520W PS, thought the PS got a little hot, 2nd Mobo worked ~10hrs using Ultra 800W PS, the PS never even got warm. I don't think PS was a problem though. In both cases the PC just shut off while running. First time while loading OS, 2nd time I think I was transferring files or something mundane. When you hit the on/off switch the fan starts to spin as to power up for not even 1/10th of a second and then stops. Something is telling the PS to not apply power, kind of like when you to a shut down and ground is no longer applied to the PS_ON pin of the PS. It is strange 2 boards went out like that. Any suggestions? As I wait for 3rd PCB, I wonder if anything might be causing the problem. All parts are new. Could it be a bad video card, but it did work on 2nd new PCB for the 10 hours. I wonder if ASUS has a bad lot of mobos. Any thought appreciated.

4 replies

by oh smeg

Just make sure that you have plugged in all extra power sockets on the M'Board and the Video card. If you don't plug in the extra sockets the M'Board is attempting to draw power through the main ATX Connector and the excess current will fry the M'Board every time.

The fans running for a Short time is a sign that the M'Board isn't sending the correct signal to the PS to keep running so it's shutting down just like it's designed to do.

That's about all off the top of my hear though.

Col

by smitpr

The 8 pin of the PS is connected to the mobo and the 6 pin of the PS is connected to the Video card. Can't see anything else to plug in. I agree in that I don't think I'm frying the PS. Just wondering if a flaky video card or DVD, etc could break the mobo. Seems unlikely. I wonder if something simple like a temperature sensor is breaking. BTW I have been very closely monitoring CPU temp. The most I ever saw with the stuff that came with ASUS is 50c. Usually around 45c. Besides when I put the CPU in 2nd PCB it worked. SHipping costs are killing me.

by oh smeg

Somewhere down the supply chain. A single hit of static to a M'Board will degrade the components on it and make them susceptible to failure without warning.

Just make sure that you are following the standard Static Control Procedures and that's about ail you can do. I would be really suspicious if a M'Board turned up without a Anti Static Bag but even if it comes in a bag there is no possible way to know what's been done with the M'Board prior to you receiving it.

Col

This discussion is closed to new replies.