Question Locked

New Video Card & Erratic Video Problems

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Dell Dimension 8400. I recently replaced the standard ATI Radeon 300SE video card with the NVIDIA 6800 GT (both PCI-E cards). At first boot, all was working well. However, I have problems when rebooting after shutting down. The screen shows some garbled words at boot, and occasionally some small rectangular colored spots on the screen. When it's showing the Windows logo during reboot, the screen and system freeze. If I reboot in safe mode, the machine will boot, but the video is extremely rough, with an omnipresent greenish checkered pattern. However, in safe mode, by minimizing and maximizing almost any window after it completely boots up, the green pattern goes away, and screen looks great. When I reboot from safe mode after this, all works perfectly! If I reboot again and again, all is well, however, if I let the machine sit for 1/2 hour or more after shutting down and try to reboot, the original problem returns.

I've done everything I know, including verifying the card is seated well, checking power connections to the card, updating to the latest video drivers, updating the BIOS to the latest and greatest, reinstalling card drivers and starting from scratch. There is no onboard graphics to disable in the BIOS. Nothing works. The old card works well. I then tried putting in an ATI Radeon X800 Pro, and the machine wouldn't even boot.

Any thoughts? I do not want to have to use the original card.

3 replies

by hal 9000

Was not to remove the ATI Driver before changing the Video Cards over.

Now what is happening at a reasonably good guess is that you are having the different drivers for two completely different Video Cards come into conflict when you initially boot the system and this is continuing till you eventually get the NVidia drivers to be the accepted default ones.

There is another possibility and that is that the new Video Card is much faster than the one that it replaced and this is causing problems as the system was never designed to work with the faster Video Cards so it's throwing up rubbish while attempting to supply a Video Display. Or that there is a Basic Hardware Conflict between the Chip Sets on the M'Board and the Video Card so you are getting some strange Video Displays as a result.

Col

by golfhike

I did remove the ATI driver before changing video cards over. As far as a Video Card conflict, I suppose it's possible. I installed the Nvidia 6800 GT card, and Dell actually recommends and sells the 6800 card (not GT) for this computer. Dell also sells the ATI X800 card, which I also didn't get to install.

The conflict with drivers makes sense, since I only have this problem on a fresh computer start, but I removed the old driver. I'll verify it's not lurking out there somewhere.

This discussion is closed to new replies.