12 replies
by nnewell Accepted solution
by shasca Accepted solution
Can you map a drive to a network resource? Do you get any errors.
You just can't browse to resources is that the issue?
What protocals(File and print sharing, Client for microsoft Networks etc.) are enabled on the local connection?
by nnewell Accepted solution
Hi Thanks for your reply yes i just cant browse so dont even get the chance to map.
The protocols that re set are
client for microsoft networks
determinisitic network enhancer
QOS packet scheduler
file and print sharing for microsoft networks
internet protocol version 6
internet protocol version 4
link layer topology discovery mapper i/o driver
link layer topology discovery responder
hope that helps hti sis driving me nuts ive been all over asking and no one has a clue wish i could bring back XP !!
by shasca Accepted solution
Unless you are using ip6 just uncheck it. Everything else is good.
You don't need to be able to browse to be able map.
Just right click My Computer choose any letter and in folder window \\ServerIP\C$\D$
or \\server ip\folder name,volume name.
Doing this will give an error if the problem is either VPN settings or right issues
by skdtech Accepted solution
Is Vista set to see the VPN connection as a Private or Public network.
If it is saying the connection is public then it won't allow connections with other PCs on the network.
by nnewell Accepted solution
by robo_dev Accepted solution
is that Windows uses UDP by default for Kerberos authentication, and UDP does not play well with VPNs. Therefore the workstation cannot successfully authenticate with all relevant resources.
http://support.microsoft.com/default.aspx?scid=kb;en-us;q244474
The fix is to make a registry change to the client, as outlined in the Microsoft article listed above.
From a troubleshooting standpoint, the most effective tools to use are the NetDiag utility that's part of Windows, or WireShark (free sniffer utility).
The bottom line is that the relevant protocols are either being filtered by a firewall or mangled by the VPN.
by nnewell Accepted solution
i unchecked ip6 no difference and then did your mapping and i got an error
The mapped network drive could not be created because the following error occured.
The file could not be accessed by the system.
not sure if that shines any light for you but thanks for trying
by shasca Accepted solution
by nnewell Accepted solution
Hi Shasca
The set up of the VPN is exactly the same as it was of for the XP PC ok i could not import the policy as i was going from XP to Vista and it would have screwed up the client software ( Netgear advised this) but i had taken screen prints of all the set ups on the xp and just trnasfered them to the Vista.
Is there a way i can check if i have Domain access probably a silly question or is there something specific i should have set on the VPN client which is different from XP to Vista for doamin access
regards
Norman
by nnewell Accepted solution
Hi Robo
its getting late here so im am going to wait till the morning before i try your fix incase i screw up. Is there any possibilty that i will hang the pc as the microsoft link mentions. as if so how will i recover it. Also it doesnt seem to mention Vista not sure if that makes any differnece either. Thanks for trying to help
by skdtech Accepted solution
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending