Desktop

Ask something
Discussion Locked

No Boot Up

0 helpful
3 replies

by cybergun35

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
This computer i've got will not startup when you do a cold boot, the cpu fan and powersupply fan is working but the moniter will not show any signal what so ever. I have even pulled the cards out of it and removed the ram, but i donot get any beep code errors at all, Any help would be great thanks.

3 replies

by thechas

If you get no beeps with the video and RAM missing, it sounds like a CPU or motherboard problem.

Most BIOS's squeel the speaker with either RAM or Video missing.

Try resetting the CMOS memory and then booting.
Sometimes the CPU clock gets set wrong, and causes the System to not boot.

Also, check all jumpers on the board.
Make sure that the clear CMOS jumper is not set.
And that the clock and voltage settings are correct.

Chas

This discussion is closed to new replies.