Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Computer worked fine 2 days ago then turned it on and it stopped at the compaq logo. down at bottom left of screen gave choice of boot order or f10. per Hp tecj have reseated memory, re-seated harddrive, drained battery and set bios to default. When i do a hard drive test in bios is says ide device not detected. Tecj person said to send puter in for them to check. said will cost 298.00. Economy sad don't have that kind of money. Any other help? Running windows vista. Cam with ie but upgrated to vista a year ago- working fine since untill 12 nights ago. If let it sit at logo icon it finally goes to blank screen with blinking curser in upper left but won't go any further. PLease, PLease help
2 replies
by whitelace78 Accepted solution
Clarifications
by rob miners Accepted solution
Turn on the PC and ?Press to enter setup?.
Use the arrow keys to select System Configuration.
Select Enable enhanced SATA mode and then press enter.
When a confirmation prompt with your preference selected is displayed, press enter to save your preference.
To set your preferences and exit the Setup Utility, press f10 and then follow the instructions on the screen.
Keep us informed as to your progress if you require further assistance. ;) :D
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies