Question Locked

No video signal BFG geforce 7800 gt once I upgraded to Vista Business

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have had this GPU since it came out and worked perfectly with XP media center. I recently upgraded to vista business and now I am getting no video signal. The CPU boots up fine and the gpu sounds and fan runs normally, but still no video signal. Once I remove the card and run video of my moboard i receive a video signal. I have tried to install the latests updated drivers for my GPU but I can't unless I have my card in. Any suggestions will be appreciated.

6 replies

by firstweb0

what is the specs of your video card as far as I know your video card is not compatible to your OS try to used other video cards..

by computercookie

according to there website.

Contact their webite first.

>> Frequently Asked Questions ? please read before contacting Tech Support, your answer could be Here!

Tech support available 24 hours 7 days a week

>> Toll free in USA and Canada only:
1-866-BFGFIXX (1-866-234-3499)
>> For customers outside the United States, please use the following telephone number. NOTE: This is a TOLL call and your phone bill will reflect the charge: 630-637-2459
Email: support@bfgfixx.com

BFG Tech provides 24 hour toll-free telephone and email technical support. In order to expedite your support inquiry, we encourage you have the following system information ready when you call or email us:

>> A DESCRIPTION OF THE PRODUCT.
>> THE PLACE AND DATE OF PURCHASE.
>> A BRIEF DESCRIPTION OF YOUR PROBLEM.
>> YOUR CURRENT SYSTEM CONFIGURATION DETAILING THE FOLLOWING:

> BRAND OF COMPUTER
> BRAND OF MOTHERBOARD
> MOTHERBOARD CHIPSET
> SYSTEM PROCESSOR TYPE & SPEED
> SYSTEM RAM
> SYSTEM BIOS VERSION
> DRIVER VERSION
> OPERATING SYSTEM ?FOR EXAMPLE MICROSOFT WINDOWS 98

by boxfiddler Hot topic

in order to change the system default display to the card rather than the onboard. There may also be a BIOS setting you need to change.

by pdozal

Thanks for the advice. I have a jumper on the moboard, so its not a power issue. I will try the bios. Thanks

by boxfiddler Hot topic

I remember having the same problem when my video card shot craps. I wanted to move to the onboard and forgot that I had set a jumper a certain way to bypass the onboard. Once I changed the jumper setting, I was back in business. Drove me nuts until a friend reminded me to check my mobo manual!

This discussion is closed to new replies.