Question Locked

Notifications failing in Project Server queue

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Greetings fellow networkers,

My team has a unique issue apparently, because I haven't found this exact issue on any site that I've perused thus far. Hence, I turn to posting a message to see if any of you can assist in my team's endeavor of Email Notifications in Microsoft Project Server 2007 (MSPS07).

Environment: We have a stand-alone server installation of MSPS07. Shared Services is setup for the standard Virtual SMTP Server pointing to our Exchange Server.

Setup: The outgoing e-mail settings are setup with the fully qualified domain and server names. The incoming e-mail settings are enabled, the domain name inserted in the display address field, and the IP address is in place for the Safe E-Mail Servers setting. (We tried both with and without the subnet addition, as per MS TechNet.) Alerts and Reminders is set up as per MS TechNet, as well: the SMTP mail server as the fully qualified server/domain name, the from address has been tried with a non-service account as well as a service account in Active Directory (AD), the company domain has been tried with the full domain name, as well as the web/e-mail domain name.

Issue: All Job Types flow through the server queue with no problem except for Notifications. They deliver a Job State of Failed But Not Blocking Correlation. The specific error has been uploaded to this message at this URL:

http://www.eggheadcafe.com/fileupload/-1731510758_MSPS07_NotificationEmailFailedDelivery_Message.PNG

Please advise us on any route which may help to resolve this issue.

Thank you very much...

Alan S.

11 replies

by cg it

Microsoft has community boards where actual Microsoft software people respond to questions. Yours would be a good candidate for their community boards. MS would probably like the file to examine.

by shasca

Whenever I setup any kind of forwarding, and it asks for an SMTP server I use the IP address. The error indicates that is where the issue is. If I'm reading it right.

by shasca

Do this from the project server.
start \run \cmd

tracert (the full name of SMTP server)

then hit enter and see if there is an error tracing the path from server to server.

Somewhere along the way the project server can't communicating with Exchange.

Double,triple check the SMTP server name in Exchange, and the entry in Project.

Let us know.

by asaranga

tracert from the project server to exchange completed I am getting:

1 <1 ms <1 ms <1 ms EXCHANGEBOX [XX.X.X.XX]

This discussion is closed to new replies.