Windows Forum

Ask something
Discussion Locked

nt 4.0 mapping problems to a shared sanp

0 helpful
5 replies

by jrinehart

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have an NT 4.0 network w/ win95/98 workstations. I installed a snap drive and have 2 shares setup. Originally the default share is Drive1. Now I have set up 2 other shares. When we try to login I still get the old share. My login script is correct. I tried to manully map a drive to these shares and it works fine?? Why are these shares not mapping on my NT 4.0 network??

5 replies

by computerdude

Most likely the drives were mapped persistenly in Win95/98. Disconnect the drives while logged on. Then log off and on and see if you now have the correct drives.

Hope this helps,
Dave

by jrinehart

Dave,
Yes, I deleted local mapping and restarted. Still can not proper drive mappings. Keeps coming back with original drive mapping that we had before. I have changed login script and they do not seem to work?? But, I can manully map a drive?? Doesn't make sense.

by mike

Make sure you covered all the basics, first make sure your in the proper scripts directory on your server. make the first command of your login script "net use * /delete /yes" (this deletes ALL mappings local and network) then start with the propermappings.
the script should be in \\winnt\system32\repl\import\scripts and make sure that the users have the proper name of the script in the user manager for domains.
Good Luck
Mike

This discussion is closed to new replies.