Discussion Locked

NT Workstation won't Telnet

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a NT 4.0 SP6a w/s that is setup on an
NT Domain. The network strictly uses TCPIP. We can get to the domain and all shared resources just fine. We can not Telnet to a
RISC 6000 Unix box that runs our Production App. I can PING the Unix Box, I can do a TRACERT to the Unix Box but when I try to Telnet to it I get an error saying Network not available. It appears to be a problem with this particular workstation as I can Telent from other workstations but I cannot Telent from this one to the Unix box or to the router at this remote site. Any hekp would be appreciated.

Thanks
RJ

5 replies

by mpdcsup

Are there any *working* workstations on the same subnetwork as the failing one? If not, there could be a problem with a router or firewall not passing port 23 (one, the other or both ways).

Does your unix machine use a hosts.allow or other .allow table (or a .deny table) that could be turning down the telnet service request?

Can you telnet any host from the failing machine? Say, the default gateway?

Are you attempting to telnet using a host name? Or, are you specifying an IP address? Some 3rd party telnet clients use their own DNS/HOSTS/BIND configuration.

Since "Network not available" is not a Windows telnet message, have you tried the Windows telnet client?

by jroeckle

I do not believe it is a port problem because I can telnet with other W/S's
on the same subnet. I cannot telnet to anything from the failing W/S including the default gateway even using Windows telenet client. I am using the IP address to telnet, so there is no DNS involved. I will check out the allow or deny table on the unix host but, this W/S worked as a Win95 W/S but it is failing telnet only as a WinNt W/S.

Thanks
John

by jstocker

If you are using the NT telnet program try using a third party telnet or reverse it if you are using another vendors telnet. I had the same problem on a machine that I upgraded from 98 to NT and for some reason NT's telnet corrupted during the install or service pack 6a update.

This discussion is closed to new replies.