Discussion Locked

NT4 NIC installation (Enterprise,Select)

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

During inst. of NT4 Enterprise Select i have a problem installing the NIC on a Domain BDC.
What happens is that i can't install the NIC without SP4, wich is NOT supplied on the NT4 Select CD's (only SP1).
I know there is a way to migrate the SP4 or higer with the installation directory \I386 to get an installation that supports SP4 or higer.
BUT HOW AM I DOING IT ???

Thanks in advance
\\\ Johan Boquist
NT-Admin & Support

8 replies

by bill cassada

Sounds to me as if all you need is a copy of SP4.... You can download it from the Microsoft website on the computer you used to post here and then transfer it to the other computer. You may have to do it with floppies (God forbid!!) but if that's what it takes, then at least you'll be up and running!!

by kevin brown

I have run into this problem before. Install NT with the NIC drivers even though they will not work. Then install SP4 or greater. Remove the NIC drivers and all networking components. Reinstall NT networking.

by bodan3

I can add a thing here, the difference between WINNT4 server and WINNT4 server ENTERPRISE regarding this problem is that if i had a regular serverlicence, then the answers would have helped me.
But with the ENTERPRISE licence AND that im installinga BDC is where the problem is because without the network connection the installation WILL fail and not go any longer than the NIC install screen, on the other hand with a regular server licence you CAN trick the installation as mentioned above, this is NOT the case with ENTERPRISE for some reason, thats why i want to know HOW to migrate the SP4 into the \I386 installation directory.

by bill cassada

Haven't done this in awhile, but you can extract the SP directly into the directory. You'll have to look up the switch, but you can execute it from the command prompt and place it wherever you want it.

This discussion is closed to new replies.