5 replies
by thechas
First, for automatic shutdown, the PC MUST be an ATX style system, not an AT style.
How to tell?
ATX power switches are all push button style switches that do not latch in either on or off.
An ATX power connector has 2 rows of 10 pins in a single plug.
An AT power connector is 2 8 pin connectors that plug into a single row of pins.
If the motherboard is a dual mode, (has both AT and ATX power connectors) a jumper and / or BIOS setting needs to be set to enable automatic shut down.
Even if this is a true ATX system, you need to enable ACPI mode in BIOS setup to have the option to shut down.
I don't have access to a NT system to verify device manager settings to enable ACPI features.
In Windows 2000 and XP, you view all devices, and right click on ACPI, then select enable.
Chas
by healer
by healer
I can't see where I can respond, so I use Add Comment.
I went into Power Management Setup in BIOS but I couldn't see ACPI item in it.
Anyway the same computer works for Windows 2000 and Windows XP and Windows 98SE as they are also installed. They seem to work by default, ie without me changing any setting.
Thanks!
by healer
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending