4 replies
by herb
by hozcanhan
by scmgithd
VPN? Why does it have to be through the internet if the locations are connected? I have an AS/400 at location A, location B is connected with a T1. They are separate networks, connected with routers. We don't have any problems because of the way the routing is set up in the routers (there are routes set up for both addressing structures). Locations C and D are not connected to the network and use a VPN connection to come in. We have a Cisco PIX Firewall that it runs through.
Good luck!
Donna
by grymattr
It's just basic routing. Gateway of last resort needs to be set on the router in location A.
Example: Location A has a network of 172.16.10.0/24 and Location B has a network of 172.16.20.0/24. Location A IP's would have a default gateway of the router/layer 3 device. Let's call it 172.16.10.1 Location B - same situation and we'll call it 172.16.20.1. Location B needs a layer 3 device that directs all traffic not destined for 172.16.10.0 to the Internet. The router at location A will require the same config. All traffic that is not local goes to Location B and it will route it out.
If you'd like more specific details you are welcome to email me at grymattr@att.net
Peace,
Dean
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending