6 replies
by thechas
First off, Windows NT, 2000, and XP do not take well to moving the hard drive from 1 PC to another. Unless all of the hardware is nearly identical.
As to your problem, I suspect a loose or damaged IDE cable. Or incorrect jumper settings on the drive.
Other possibilities include:
New drive is too large for the BIOS on the older computer.
The BIOS is not set to auto detect for hard drives, and does not detect the change in hard drives.
I personally "strongly" advise you to NOT move a hard drive with XP installed to a different PC.
You are ALWAYS better off performing a clean install.
Chas
by g...
by g...
This my be fine to do if you're using identical or near identical computers, what you're trying to do is make your wife's computer act as your own. XP won't do this very well.
XP likes to check the configuration before loading and will not load if it knows that it doen't have the right drivers or detects that hardware is faulty.
The easy answer is:
start the computer;
put the XP disc in the cd/dvd drive;
restart;
open Bios and select boot from cd;
xp will tell you if it has a driver problem, however it won't tell you if it has decided to load because of faulty hardware.
If you need more explicit instructions please contact me.
This my be fine to do if you're using identical or near identical computers, what you're trying to do is make your wife's computer act as your own. XP won't do this very well.
XP likes to check the configuration before loading and will not load if it knows that it doen't have the right drivers or detects that hardware is faulty.
The easy answer is:
start the computer;
put the XP disc in the cd/dvd drive;
restart;
open Bios and select boot from cd;
xp will tell you if it has a driver problem, however it won't tell you if it has decided to load because of faulty hardware.
If you need more explicit instructions please contact me.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending