Question Locked

Outlook 2007 will not connect to SBS 2003 over VPN

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello All,

My name is Bill and I recently deployed a SBS 2003 R2 server for a local company with about 10 users.

Here's my question - On one particular laptop, I cannot get Outlook 07 to connect to the Exchange server over vpn. I am able to ping the server over vpn using IP address and Hostname, view fileshares on the server using Hostname, even connect over RDP using IP address (hostname does not work here).

This is using the vpn client deployed by SBS 2003 from remote web workplace, and I have 5+ users who use this vpn client to connect to the server in order to connect to exchange without issue, but this laptop is being troublesome. Laptop is running Windows XP MCE SP3. Windows firewall is disabled, no other firewall software on the machine.

I even tried bypassing the router at the laptops location and plugging directly into the modem in order to attempt to resolve this, nothing seems to work, can someone please point me in the right direction.

3 replies

by jlehman

Bill,

I have about 15 clients that use SBS and have experienced the same thing you have. I found a better way to do what you want that is safer because you can turn the Windows firewall on to keep the laptop protected. You can skip the VPN and simplify the steps. I use Outlook RPC over HTTP to connect clients to email. The Outlook RPC over HTTP uses an SSL port 443 connection from the laptop to the server. The SBS server has a guide that is customized for you and you can test it from inside the network to verify it works before testing outside.

The SBS server will walk you through setting up Outlook using RPC over HTTP. Outlook 2007 calls it Outlook Anywhere. Log into the remote web workplace website but do not log into the server. On the right side of the screen you should see a prompt to connect Outlook using RPC over HTTP. The guide will give you the steps you need. If you do not see the guide, you will need to run the Connect to Internet and Exchange wizard again and open up the Outlook Anywhere/RPC over HTTP port.

Tips:
I have found you usually need to add the website to the Trusted zones in Internet Explorer. You may also need to install the certificate for the remote web workplace website. Once these two items are done, just follow the steps from the guide.

Jeff

by mudgie

Take a look at the hosts file (c:\windows\system32\drivers\etc\hosts) and see if perhaps there's an old entry that's redirecting that IP address to a different server name. You should also consider setting up "Outlook Anywhere" functionality, or Outlook over HTTPS using RPC (http://www.petri.co.il/configure_outlook_2003_to_use_rpc_over_http.htm). This would allow you to use Outlook without the VPN. All you need is a certificate and the proper configuration (outlined in the referenced article).

I'm curious if you can create the Exchange profile over the VPN connection. If not, then it definitely points to a name resolution issue.

This discussion is closed to new replies.