Windows Forum

Ask something
Question Locked

Overclocking Failure !!!!

0 helpful
3 replies

by ernesto.acosta 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Anyone out there run into this: I just built a system with an ASUS P4C800-E Deluxe mobo with Intel P4 3.0 Ghz; 2x512 Crucial pc3200 DDRAM.
I EZ Flashed the BIOS to v1021. Problem is on Boot I get a message saying overclocking failed and giving me the option of pressing F1 to go into the BIOS or F2 to continue with loading defaults. Pressing F2 allows me to continue but the issue is I haven't done anything to overclock and to the best of my knowledge I am already running with defaults set in the BIOS. Has anyone out there run into this

3 replies

by bhatnagar_nitin9

and go into BIOS. Find the overclocking feature in the system setup and disable it by pressing page up/page down key. Save settings and exit. Check the same upon restart.

by tobywilson

Hi there,

I know the reply may be comming a bit late but I experieced the same problem. After checking everyting else I found that the RAM modules were causing the problem.

Cheers,

Toby

This discussion is closed to new replies.