Question Locked

panasonic flatbed all-in-one KX-FLB800 won't share

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a new panasonic flatbed all-in-one KX-FLB800 printer. It is directly hooked up to one computer via USB cable. The printer functions properly on the PC.

I selected share on that PC. I was able to locate that PC on the other two PC on the LAN. Everything appeared to be fine. You can print a test page on both PC. You can print from notepad. You cannot print any word / excel document.

Windows troubleshoot indicates driver issue. I cannot locate any stand alone driver from Panasonic. Panasonic tech support says I can't share this printer. Am I missing something? I'm not sure what the printer could have to do with sharing.Will this printer not share? Can anyone locate a proper driver for this. The PC its on runs server 2K. My laptop runs XP Pro SP2. The third PC runs 2K Pro.

3 replies

by thechas

There is a presumption on the part of most of the all-in-one printer manufactures that these printers will NOT be shared. All-in-one printers are targeted as a single user solution.

For any function other than printing, you need to be at the printer anyhow. What good is it to share a single user machine if other users need to walk up to it?

My recommendation would be to install this device at the computer of the user who needs to fax and copy the most. Then, install a properly sized laser at the server.

Chas

by tbarkdull

You can try setting up Internet printing. I have a USB lexmark at home, shared through Internet printing and am able to print from any PC, wired or wirelass

This discussion is closed to new replies.