Question Locked

Password Problem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've owned a Compaq Presario V2000 for the last 2 years. My kids use the laptop for homework, itune music downloads, and playing World of Warcraft. I also use the machine for some elements of my work, online banking and taxes. Recently when I turned on the machine a password field appeared. None of the other users in my family attempted to set a system level password so I'm not sure why the option has activated. Long story short the system now requires a password to allow access and I don't know the password. I've read a few threads on this site which noted for desktops a watch battery must be removed from the computer to allow the BIOS to reset. Does this same logic apply to laptops? I've already reomved the rechargeable battery pack attached to the exterior of the machine. Is there an internal battery that I need to disable as well?

Thank you in advance for your assistance on this issue.

Regards,

Mrobin8138

4 replies

by fwang

I had the same problem before. Many laptop has a master password, you can search on the internet (which is how I found the master password for my laptop), or call compaq (now HP) to get it. If compaq laptop does have a master password. Mine is a DELL laptop.

Good luck!

by hal 9000

And yes the same applies to NB's as well as Desktops computers though with a NB you have to open it up and remove either the BIOS Battery or the BIOS Chip from the Smart Socket depends on the NB in question.

However that doesn't cure your current problem. I hope at least you have different user accounts so that the other members of your family don't have access to your data but with what they are doing they can still install some Spy Ware that leaves you vulnerable to having your Bank Accounts emptied and your Tax Returns/Refunds Redirected unless you regularly scan for Spy Ware & Mal Ware which by the sounds of things isn't happening here.

Now when you originally got this unit you where asked for a Master Password to be typed in as you setup the computer. This was the very first thing that you did after accepting the M$ End User License Agreement.

That will be the password that you are currently being asked for. You should have been prompted to write that Password down in the Instruction Manual that came with the NB so look there as your first option.

If you didn't record the Password try starting the unit in [b]Safe Mode[/b] by pressing the [b]F8[/b] key before the Windows XP Splash Screen Appears and then when prompted only select [b]Safe Mode[/b] if there is an Administrator Account you should be able to access the system from there and then work out a way to work around the password that has been inserted. You should also ask your children have they been prompted for a Password for a game or the like and find out what it is as that could have been added to the Account and be the Default Password now.

Just remember that you have 3 attempts to get it right and then the system locks up and will not accept any more passwords even if it is the correct one so after you try 3 times you have to restart the computer and try another 3 passwords till you can get in.

Col

by anakin-dv

Ihave the same problem with my Presario V2000. I tried various alternatives without any results. But I recal the Ultimate Boot CD and that was the answer to tribulations with the BIOS password problem. try the Ultomate Boot CD (UBCD)4' BIOS utilities.

Good luck.

This discussion is closed to new replies.