Discussion Locked

Pc can't handle the load

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've got a 8100 and it can't handle all the devices i have on it now,much less starting to network through my ethernet.this host has dsl/usb(900kbps),scan,pnt,cam,/usb,plc prog./com port on WME.

8 replies

by ann777

You need to setup various hardware profiles and boot into the one you need when you start your computer.

For instance copy your current profile into another and disable the scanner and camera in the second profile. Then use it when you do not intend to use these two devices. Create another profile with these two devices but not some of the others.

You have to balance what you need. My Dell couldn't handle all the hardware I pout on it at once either. I separated the devices I needed into four combinations of hardware configurations so I could do what I needed without problems.

My computers are Win98, 98SE, Win2000 however (so I can't give you specific how-to's). I haven't used Me, but you should be able to accomplish separate hardware profiles through WinMe as well.

by tarrellmartin

I need access to all devices without breaking any connections on the host pc, aka"signing on and off profiles".

by tjc

You answered your own question in the comment of the above poster. If your computer can't handle the hardware and you don't want to do diffrent profiles, then you will need a second computer so that you can have access to everything at one time, or you will need to get rid of some of the hardware as you have right now and get USB devices as replacements of them all. Since USB can handle up to 128 devices.

by tarrellmartin

My pc has 8 USB ports and can handle all the hardware,just not in a multitask enviorment without errors.

by oup

sounds like my little baby pc......
what i do is...........
just unplug something you don't use often!
and plug it in again later.....
it's cheaper than a new computer....
good luck...
oup

This discussion is closed to new replies.