Question Locked

PC - no boot, no video, CPU FAN running and PSU fan running

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here are my PC specs:
1GB 667 RAM
Emaxx MCP61P-AVL
AMD 64 X2 5000
on board NVIDIA video

Okay..I am not that too technical but i have knowledge on some stuffs about computer. My computer wont boot normal. when i turn on my pc, the CPU fan is working , the PSU fan is working, i can hear my HD running but no video or error beep sounds.

what i did was to reset all the cables and the memory. still the same (Darn!). then I remove the memory then i start hearing continuous multiple short beep sounds. then i turned the pc off and reset the CMOS setting jumper and then return the memory and the cmos normal jumper settings. but still it has no video or beep sounds.

then i checked the CPU if it is fried. seems it is not since i cannot see any burned marks on it or smells burned.

my question are
1. is my memory ok since when it is inserted there is no beep sounds and all Fans are running?
2. Is my motherboard dead? or it is ok since there are beep sounds when memory is remove?

3. What should my next step on troubleshooting?

6 replies

by oh smeg

But to trouble shoot this start off with a [b]Known Good[/b] Power Supply.

Unplug the M'Board and any other Power Leads that go to the M'Board and try turning on now. If it works you have a dead Power Supply so replace it with a Good Quality Brand Name one like a Antec which is rated to a constant Power Load and offers far Superior protection for the Internal Parts of the PC.

If things have not got too bad you may be able to salvage the internals but you just as well may not be able to salvage anything. While it's a good sign that the M'Board is giving the Correct Error Beep Code with No RAM Fitted there could still be damage done to the M'Board or it could have started to Degrade and suffer a premature failure =in the very near future.

You may be able to salvage your Data off the HDD by removing it fitting it to a External USB Enclosure and reading it from another computer that can read that Partition Type.

It's hard to say anything else here though.

Col

by blu_asteruth

I unplug all the power cords that leads to my motherboard (CPU fan cord, motherboard cord) and my PSU did not run so does that mean that my PSU is OK? if my motherboard is OK and my RAM seems OK. how do i know if the CPU is dead although i am hoping not since as i said when i checked the CPU it didn't look burned.

by jzean

In my experience, not all RAM problem trigger an error bip sound from your M'board, maybe you can borrow a known good RAM from a friend...

by oh smeg

At the very best all it means is that the 12 V DC Line has power it tells you [b]Absolutely Nothing[/b] about the 5 V DC or 1. something V DC lines. Any of these could be either dead or just not producing enough Current to run the computer.

I had one customer replace the M'Board, CPU, RAM and so on before returning the unit to me for repair. No matter what he replaced it still failed to work and when I replaced the PS it worked perfectly with Both Computers that he had purchased by now. All he needed was another case & Power Supply to have a second computer that he had no use for or wanted and had paid for I might add. :D

His reasoning for all of those unnecessary parts was that the Fans ran so the PS must be OK. In that particular case the PS was not producing any power on the Rail that supplied the CPU so the computer didn't do anything but run the Fans. Well actually that particular one did when you turned it on the Monitor came up with a Disconnected message that disappeared when you powered down. That was very unusual as generally they don't show anything at all.

As for testing the CPU your only option is to bung it on another M'Board and see if it works there.

Col

by fettu1293

"no video"

Your next step of home trouble shooting is to try to isolate which component could be failed. Is it onboard Video Card? How many memory sticks do you have?
If you have 2 sticks, insert only one and see what happens. If you have only one memory stick, I'm inclined to think that, based upon what you wrote, it's not the memory stick.

Try using another Graphics card and see what happens.

Your next step is try and find another CPU to insert in your motherboard. If you don't have any other computer parts you can swap around to do some home tests, take the motherboard and CPU to a computer store so they can perform some diagnostic tests and see which one of the two isn't working.

Honestly, it's probably the motherboard or the chipset which is burnt.

Hope this helps.

Jules Fettu

This discussion is closed to new replies.