PDC20378 setup problem
Hi! This is my first time to post..i need help on how to setup properly windows xp fresh install to boot from sata drive that is connected to pci controller card(PDC20378). i just followed what on the sites said..
- create a copy of driver disk into the floppy drive
- boot from cd installer(winxp pro) and press F6 to install third party driver for sata
- select proper driver and it continues to go to the menu
- after pressing enter it did not detect any hard drive installed
my pci card detects there's no array defined..but i don't want to setup my harddrive in raid array because it has data in its second partition.
this is my system specs
-mobo: a7v266-c
-cpu: athlon xp +1600
-memory: 512 mb
-hdd: seagate 160gb (set jumper to 1.5gb, partitioned)
-pci sata controller: pdc20378 chip
thanks..