Question Locked

Phoenix Award Workstation Bios

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

It seems that my Phoenix Award Workstation Bios has set a default overclock to the CPU, AGP speed and RAM, I have reset bios/cmos and tried every option possible, I can't remove it.

The result of this unwanted overclock (I think) is a kind of wavy screen when playing games, kinda like the effects a chewed video tape would have when played (no white screen of fuzzyness, just distortion). Is this related to my problem? How do I fix it?

Thanks for your time :)

4 replies

by hal 9000

If there is one available.

Then look at what the actual settings are as the CPU and RAM should be set to the FSB of the CPU.

As for the AGP Port I'm not actually sure that you can Overclock these as they are either up to a 4 X or 8 X Socket hardly anything you can do there but maybe if you have the Video on the M'Board you are using the CPU and RAM to produce Video Signals and this is much slower than using a dedicated Video Card with a GPU and it's own RAM as both of these units run faster.

If you have everything on th M'Board try allocating more RAM to the Video and see if this improves the situation at all. Really though these are made for Workstations and not Games Computers as they can Not Possibly produce the same results as a separate Video Card on the M'Board can.

If you have a separate Plug In AGP Card look for any problems on the Video Card particularly if it requires extra power do you have the Power Adapter Plugged into the Video Card as the M'Board can not supply enough power to run these properly. Also if there is a Cooling Fan on the GPU make sure that it's actually running and that there is no buildup of dust and other rubbish in the Heat Sink that is allowing the GPU to Overheat and possibly break down.

As for what the correct Speeds of the CPU & RAM should be you'll need to post the Make & Model of the M'Board and what CPU type you are using as different CPU's have a Different FSB and need to be set to different speeds.

Col

by vondaze

My PC Specs:-

CPU: AMD Athlon x2 4400+ 2.2ghz 2mb cache (skt 939)
Video Card: ATi X1950 Pro 512mb 600mhz
RAM: 2gb dual channeled crappy RAM @ 160mhz.
Motherboard: Nforce3 A-939

From what I can gather, there is no BIOS upgrade available for Phoenix, I have looked on google and most importantly, the Phoenix website - which directed me to a website where I would have to pay for an updated bios which might not even exist.

Concerning the possible build up of dust and such in my system, I usually disassemble the PC and use cans of compressed air to reach dust inside the fans or hard to reach areas - I keep it clean as much as possible.

I have recently upgraded my video card and processor, but I'm still getting this very same problem.

I currently use a 550w Blue Storm PSU which I have also upgraded to in order to try and fix this.

Thanks for the response, lets hope we can sort this :)

This discussion is closed to new replies.