Discussion Locked

PING General Failure

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I Got this report when pinging my gateway and any other intranet host:

Pinging 10.10.3.2 with 32 bytes of data:

General failure.
General failure.
General failure.
General failure.

Ping statistics for 10.10.3.2:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)

I still can browse outside intranet only.
I can't ping over the gateway.

Last activites i did:
Update BlackIce Firewall 3.6.com

Last activities before update:
I got intrusion from one of the computer on the net.
Windows Restart Countdown. General Error report.
(it is not msblaster)

What happend to my LAPTOP?

5 replies

by zack.phierce

Definatly black ice related, not familar with the setup of black ice, but there should be an area where you can edit program access I would scan through that see if you see "ping" from microsoft corp. and edit it's permissions. Hopefully this is some help, if not uninstall / reinstall black ice, but note even though you uninstall a firewall app. sometimes they leave some remants and active settings, with norton f/w you need to use thier uinstall utility not sure if black ice has one or not.

-Zack

by zack.phierce

I would try and reinstall BlackIce then checkthe program allowance list make sure PING is allowed see if that corrects the issue, have you tried using a socket repair utility? If not probally a shot in the dark but here's a link to one that works

http://www.snapfiles.com/get/winsockxpfix.html

Hopefully that works...

if not did you purchase BlackIce? If so do they have email support/forum support..ect.. that's always an avenue to travel down also.

by descartes

Thanks Zack for your attempt. I appriciate that.

I had already try that method.
Blackice have a removal program.
Problem still there, even thou i did not install black ICE...

Maybe if anything i can do in the TRANSPORT LAYER
or any other method please let me know...

Anyone?

by descartes

Thanks Zack for your attempt. I appriciate that.

I had already try that method.
Blackice have a removal program.
Problem still there, even thou i did not install black ICE...

Maybe if anything i can do in the TRANSPORT LAYER
or any other method please let me know...

Anyone?

by lakmalsmart

Go to administrive tools, click on services, stop the service called "IPsec Policy Agent" and use it disable.

Thank You,
Lakmal.

This discussion is closed to new replies.