Discussion Locked

Pls help with Network Design Project

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Network Design project to complete for school and I'm not sure where to begin. First, could someone tell me what are the Requirements of an internetworking Enviroment? Thanks.

4 replies

by jschein

2 pc's with nics and a crossover cable... as basic a setup as you can get... Unless of course you go old school and use parallel or serial cables to creat a null modem...

by deadly ernest

The gigabyte of info that is required to fully answer your question won't fit in this window. But if you send me an e-mail on ebywater@bigpond.net.au I do have some old notes and assignments that I can send you, please give me you e-mail postbox maximum size so I can ensure they stay within it. Please note if you can read a Visio 2000 file.

It would also help to have some more info about what you want info about. Number of hosts, subnets, Internet access, security etc.

by ted_pas7

6 years ago I was attempting to setup a simple home network to enable Internet sharing and discovered WinProxy by Ositis. Their product was a simple proxy and it did work well but that was before I discovered routers.

While there are many pages, in fact volumes, written about the basics for networking Ositis still has a great document available for setting up a simple network. Just follow this link to their site and you will find a 13 page document titled Lan Guide. Everything you need to get started is in their guide.

I'm sure this will help.

Ted

This discussion is closed to new replies.