Discussion Locked

Point To Point Wireless Configuration

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am from a third world country, and we dont many experts in the field of WAN.

I want to establish a point-to-point connection between two offices (about 8Km apart)and I have the following items in place:-

(a) Two Speedland 8400 Router/BridgesRadios -(11Mbps, 25Km Range, With all neccessary accessories)

(b)A windows 2000 server OS.

(c) A Router Software capable of Network address translation (NAT).

(d) A 64kbps VSAT internet connection at one of the offices.

Please can anyonelet me know what to do to enable the second office share the internet connection through the two Wireless Radios ?.

2 replies

by grantmo

You can do this two different ways.
The wireless radios should act as a bridge for your network so it is just an extension of the first office network.
First you can use the same IP address scheme that your first office works with, with different IP addresses of course) and assign addresses and gateways the same way you would in the first office.
Second, you can terminate a firewall/router at the location that does not have Internet access and use it as the gateway for this office. Linksys has a router that will do that and it will also do DHCP so that this new office can have private IP addresses and can be seperate from the first office.
Here's a website that sells an ISP guide that covers wireless, firewalls and routers:
http://www.surfworm.com.isp
Good Luck!

by tunde - the african guy

Thanks for your suggestions, Grantmo2.

I'll check out the site you mentioned.

The first option is more attractive since all the equipments required are already available.

Thanks once again.

This discussion is closed to new replies.