Discussion Locked

Portable Media Devices

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Why won't the contents of my jump drive show up automatically? I used to just plug it in and a new window would pop us showing the contents. Now it does nothing. Also when I click on the portable media devices, it does not show anything as being connected, but in my device manager the device is there.

7 replies

by spidershrek

When you plug in the jumpdrive right click on it and on the properties you can choose
-autoplay
-Actions
Select and action to perform
-Open Folder to view files
Apply
Ok
Hope it works

by s.vaal

It doesn't show up where I can do that. It's like windows cannot assign a drive letter to it.

by dr dij

are you sure the device isn't dead if all else seems to be working? take it to another PC and plug in, see if it shows up to eliminate this possiblitity. despite being solid state they can die.

by s.vaal

the device works fine in other computers. It also shows up in my device drivers in the hardware section. This also happens when I plug in my ipod.

by hal 9000

This is a direct result of one of the MS Security Patches it disables the USB Ports in an attempt to Secure the computer.

If you have a desktop computer this is a very common action and MS answer is to unplug the system for about 3 minutes and then plug it back in and reboot. It works just don't ask my why as I have absolutely no idea.

Of course that also depends on the External Storage Device still working but if it just stopped working after a round of MS Updates the above should fix your problem.

Col

by ozi eagle

Hi,

What I have found is that if there are mapped network drives using eg drive letter e:, and you plug the stick in Windows assigns it drive e: and you have a clash. Go to control panel, administrative tools, computer managment, disk management and manually assign a different drive letter to the stick.

This discussion is closed to new replies.