Question Locked

Possible BIOS problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Whilst my computer was shutting down, it installed update 1 of 1. I came back in the morning to find it doesnt work any more. I start up, get the motherboard logo screen and then nothing. BIOS states that my HDD is "third IDE masater", my dvdrw is Primary slave, and there is nothing detected in Primary IDE master.
Spec - Intel p4 3.00ghz, 2gb ram, seagate barracuda 200gb, p5gpl-x board.

2 replies

by k.sthalbaum

try clearing the CMOS...Look at the mobo's book to see where exactly the CMOS jumper is. Usually near the battery but it can very. It will set your Board back to standard and then you should be able to go from there you are going to have to go into the BIOS and change everything to the way you have it( Time, date, etc....)

This discussion is closed to new replies.