4 replies
by remix_writer_mix Accepted solution
by thechas Accepted solution
First off, it is a bad move to switch the voltage selector switch with power on.
Did you shut down and move the switch back to 115? (Unless you have 230 volt AC power.)
If absolutely nothing happens, the power supply is likely dead.
Replacing the power supply with a new one should take care of things.
It is possible that your power supply can be repaired. But, it does require someone with the correct skills to do the work.
Chas
by remix_writer_mix Accepted solution
by thechas Accepted solution
You say it turns on.
Do the drives spin up and pulse the lights like normal?
If not, I still suspect a damaged power supply.
If the drives flash their lights, but the system just does not boot up into the OS, it is possible that a power surge from when you flicked the switch took out the mother board or CPU.
If I had this PC in front of me, I would start by connecting the power supply to my power supply tester and see how well it is actually working.
Next, I might try resetting the CMOS and seeing if that fixes things.
Then, it would be on to the CPU motherboard and video card.
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending