power saving mode

Have you disabled it in your bios settings as well as the normal location in Windows?

On your computer, go to control panel, double-click on power management or power options, then go to power schemes or advanced. You will see the option for power schemes. You can make any changes you want there. You may change the system going to standby mode to never or anything you do not want the system to do to never. Click apply and then OK. That is it.

thanks for the help, but on the screen it says monitor in power save mode activate using pc. when you try using pc it's like it's hung had it unpluged for the weekend and it's still hung when you power up. it does not even boot it's just on. any other comments would be great. thanks

thanks for the help, but on the screen it says monitor in power save mode activate using pc. when you try using pc it's like it's hung. had it unpluged for the weekend and it's still hung when you power up. it does not even boot it's just on. any other comments would be great. thanks

Now, I understand your question. It was not clear initially. There is mothing wrong with your monitor.Your computer is not posting, ie, the computer is not booting up. The monitor is not receiving any signal from the computer. These are the possibilities: bad ram, bad motherboard, bad processor or power supply. Either of the following above can be the problem. In order to isolate the problem, you will have to try and isolate one hardware at a time.Most likely, reseat the processor and make sure that it has enough thermal compound and air circulation. If none of these resolve the problem, replace the motherboard.

This question was closed by the author