Question Locked

PPTP VPN port 4545 access

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a high end D-Link VPN router. We want some equipment within the internal network to send a TCP message on port 4545 to a workstation connected through PPTP VPN. Unfortunately we cannot even ping the outside workstation from the inside. Is this a PPTP thing or our own ignorance. Thanks guys.

Curtis

5 replies

by cg it

works as a PPP session using the GRE protocol[through IP protocol 47] and is managed through TCP/IP port 1723.

So if you want some equipment to send a message [application data]through the tunnel using a port, you need to first establish a PPTP VPN tunnel which creates and maintains the connection between the 2 hosts, then pass the data [application data] through the tunnel.

Windows will look for PPTP VPN on GRE IP protocol 47 and TCP/IP port 1723. If you don't use those, it will not recognize the PPTP inbound request as it's not looking at port 4545 for PPTP connections.

by curtisf

The PPTP connection has already been made using GRE. We would like to send a TCP message from and inside component to an outside component through the GRE tunnel. Are there certain limits with the D-Link or is it maybe limits or settings of the GRE tunnel?

by cg it

other than TCP/IP port 1723. PPTP is actually 2 sessions.

As I said in the previous post, GRE normally isn't passed through most consumer level routers [there's no GRE protocol to configure].

Try your PPTP VPN without a firewall on a test network and see if the firewall is the problem.

by curtisf

I understand now. Established connection or not packets are still going to be filtered. I am going to set up a test net without a firewall. I'll repost to let you know the outcome, or if anything abnormal occurs.

This discussion is closed to new replies.