Discussion Locked

pre-written troubleshooting for Novell

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

as I am the only IT person in the organization I need to develop a basic pre-written troubleshooting procedure. any staff member would be able to do some basic troubleshooting wheal I am away.
is there any sample I can get or where to start a guidewhere to start.
Novell netware 5.1

5 replies

by pgm554

From somebody that has worked with Novell for a great many years,unless you really ,really ,really trust the person of whom you are entrusting this job to,I wouldn't chance it.
If a Novell network has a problem,my advice would be to show them how to shut the machine down gracefully and how to reboot it.Most minor problems are solved by doing that.Otherwise,get a local guy or Novell to do phone support.For things like printing, adding users and passwords,Novell's SBS has a utility called NEAT(Novell easy administration tool)which I think can be downloaded from their site.

Giving matches to somebody that lives in a tinder box can only cause grief .

Just my 2 cents.

by pierrejamme

If you have the time, your best bet is to visit all the NetWare sites you can.
the NetWare 5.1 documentation should be in your box of CDs from the install. Put the documentation on your server or at least load it as a voulme,. Put the cd in, type load cdrom at the Console and it should mount or at least give you the volume name so you can do a cdmount "documentation name"

If you don't have the CD, bookmark: http://www.novell.com/documentation/lg/nw51/index.html

Another good one is for CNE's if you don't have this certification you may have to rely on Novell Support. See:

https://cnenet.novell.com/ICSLogin/?"http://cnenet.novell.com/cne/forums.html"

As well as their online page for CNEs at:
http://www.nwconnection.com/

Appnotes is another helpful Novell web site and can be found at: http://developer.novell.com/research/appnotes.htm

Also Dell or whomever supplies your servers will have good forums for NetWare. Dell's is at:
http://forums.us.dell.com/supportforums

You can also collect e-mail addresses of hundreds of helpful CNE for direct contact. Or visit your local NetWare Users Group, you don't have to be a CNE or even a member to attend. You would be surprised how many Micrsoft MSCEs attend.
Good Luck,

by stoneyh

The last thing you want to do is leave instructions for just downing and restarting your server. There are many scenarios where just restarting the server could make matters worse. Give them a number where you can be reached. Then you can ask themto be your hands and eyes to evaluate the situation. Then you direct them to a solution or call a support resource that you trust. If you do not wish to be contacted, then leave them a number of your support resource.

by oz_media

When I was faced with that, I refused to write a white paper outlining my training. It took some time to obtain my Master CNE cert, it would be a loooooooong boring white paper. I just insist that due to the nature of the OS, that they MUST call me if there are errors.
By the way, in BC, if you contact an employee when he is away from the office, even if it is a 30 second call, the employee can bill the compnay two hours minimum. When looking at an IT salary, this two hours can sure add up. They only call me now if it is imperative and they can't wait until I'm back.

by luis_a_delgado

I agree with most of these suggestions. The best thing is to
1.- call you on the cell phone
2.- call a third party to work on it

This discussion is closed to new replies.