Question Locked

Preventing Router Access

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have four computers. All of them connected to DSL modem. I want to make one computer as a server and other computers are clients. The reason is that when I type 192.168.1.1 on any computer, I can access the router and I can change the settings. I want to avoid that happens. Please help me. All four computers are installed windows xp professional.

8 replies

by hal 9000

Is to remove the other computers from a direct connection to the router. You would have to have it connected to one computer via a CAT5 Cable and then fit another Ethernet Card and feed a Hub from there and attach the other computers to the Hub to prevent them having the ability to alter the router.

However if you change the default password like is recommended in the instruction manual and there are others using the different computers while they will still be able to access the Router Setup Page they will be unable to actually access the Router and alter things.

Col

by sashisv

I am little confused. Do you mean that I have to install two nic card in one computer. One nic card for the dsl modem and another nic card for connecting other computers? Please help me.

by cg it

users pulling up the log on screen but no being able to log on, you can do some simple measures to secure the router.

A. change the default password and user name.
B. change the default router address e.g. default is 192.168.1.1 you can change that to 192.168.1.100 or 254 or 220 or whatever address from the range 192.168.1.1 - 254 that is not already assigned to a computer.

note: changing the default address of the router requires changing the default gateway address to the new router address.

there is no other way from restricting tech savy users from opening the log in page of the router except by the way HAL 9000 suggests.

by sashisv

My dsl modem using dhcp. Right now, my dsl modem set to 192.168.1.1. If I change the gateway, I may loose internet connnection.
I am using WESTELL VERSALINK MODEL 327W DSL MODEM. Please help me.

by cg it

HAL gave you some good suggestions to solve your problem.

I gave you a simpler method which doesn't stop tech savy users from opening up the router web page, but will stop them from being able to open it up.

by sashisv

I installd two nic cards in one computer. What if I connect dsl modem directly to one nic card and other computers are connected through the 2nd nic card. Is that going to fix the problem?

by hal 9000

Connect a Hub/Switch to the second NIC Card that will give you what you want but then again that's what I suggested at the first post here.

Col

This discussion is closed to new replies.