Question Locked
0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We've just rebuilt our print server as our old one died. It's a virtual 2003 server SP2 and it's only role is to be a print server. We ran all MS updates on it and there is no other config changes. The problem we have is that practically all of of HP laserjet printers will only print letter size paper. Even if we set the default settings to A4 the individual machines still ask for letter to be loaded. The printers are a mixture of HP5/Hp5Si/8000/9000. Other printer makes are fine. Regional settings are all correct. This should be simple but it's driving me crazy. Anyone got any suggestions as I don't seem to see this problem anywhere. Thanks
4 replies
by louise.wilson Accepted solution
Clarifications
by p.j.hutchison Accepted solution
Have you made sure you set A4 in both locations? ie:
1. Right click the printer and select 'Printer Preferences' and set A4 on Paper/Quality tab.
2. Right click the printer and select Properties and select Device Settings and set A4 for all the appropiate trays.
by louise.wilson Accepted solution
Yes - both of these areas are set to A4.
by p.j.hutchison Accepted solution
Maybe it is a setting within the Application(s) that is overriding the printer setting.
Or that the printer itself has itself set to Letter only.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Unanswered
How Can IT Teams Detect Hardware Bottlenecks in Business Networks?
0 helpful
0 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies