Networks

Ask something
Question Locked

Print Server

0 helpful
2 replies

by vinitogupta

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Does anyone know the technical architech of Print Servers and if someone knows how the print server or NAS gets IP address from the router.

Thanks for Your comments

Vinit

2 replies

by essar.max

Do it step by step...
1. Configure DHCP server on your router.
[Use This URL: http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a00800ca6b5.html]
2. Configure Print sever(windows server 2003 or windows server/adv. sever 2000)
[If you can OR Go to : http://support.microsoft.com/kb/325860]

3. Here is typical Architecture:

Router[DHCP Configured]
|
|
|
Switch
| | |
| | Network_Printer[DHCP Enabled]
| | (note: For Network Printer Static IP is Recommended)
| |
| Windows_Server[Configured_as_Printer_Server]
|
WorkStation(s)

This discussion is closed to new replies.