3 replies
by support gal
I haven't used and do not support Vista yet but I've very interested in what are real problems and what are perceived. I will check back here to see if a solution was found.
I'm curious, when you first connected the printer did Vista not see it as a new device and begin the installation? Did you have to do it all manually? If so, that's not the norm for Vista is it? I assumed that hardware install was the same procedures, just might be missing drivers. I also assume you went to HP and downloaded 4100 drivers for Vista, right? It looks like they have the drivers on the HP site for download.
by ebouza
Are you trying to install the full software package from HP? Try going to the following site http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=29118&prodTypeId=18972&prodSeriesId=83436&swLang=8&swEnvOID=2093
and download the universal PCL5 driver for Vista.
Hope this helps.
Erick
With vista you will have to go into the control panel and then click on to "add hardware", this will then scan your computer for any new hardware, if any are missing you can then select to add the new hardware or if you wish to just load up the disk that came with the printer and let windows extract the info it needs. I do not have your type of printer, but i have a canon ip4000 printer of which does not come with vista drivers but vista extracted the drivers it needed from the disk that i have and it works fine.
Post back if you have any more problems.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending