Question Locked

Printers not showing on network ping

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was asked to supply a couple of free ip addresses for new pc's on our network. I used look@lan and discovered what i thought were 2 free ip addresses. Turns out they were allocated to network printers. How do i find free ip addresses on my network? as pinging printers returns a packet lost and so i assumed the address was not in use.
Any and all help welcomed.

5 replies

by tburns

You should be able to look at what your DHCP settings and see which ip's have already been allocated and which ip's have not been.

by banx

No dhcp thankfully. Everything has a static address and when looking at a range, say 10.125.40.0 - 10.125.40.10 if a printer has an ip of 10.125.40.5 it doesn't show up as being in use and could therefore be used for a new pc. This is the problem i am having in identifying static ip's in use that don't respond to a ping request.

by vinitogupta

Is the router mac based because if so it will say the ip in use because of cloned mac so check that out

by banx

Ping commands work fine. I can ping any number of printers, but if i want to find say 10 free ip addresses in a range then I'd have to ping all numbers in the range to see if i got a response and if not would then know that address was free. This is time consuming. By using Look@Lan i can easily see what ip addresses are not being used - the problem being printers do not show.
Thanx 4 the help provided thus far....

This discussion is closed to new replies.