8 replies
by peterdehoogh Accepted solution
by hal 9000 Accepted solution
And what was changed before the system stopped working?
Col
by peterdehoogh Accepted solution
The disk is a Samsung SP0842N (80Gb/7200rpm/2M/PATA)
HDD P/N: SPO842N/MXC
I do have an old model computer: HP Pavilion
Intel Celeron 534 Mhz, 192 Ram.
I didn't change anything on my computer settings or configuration, that's the weird thing. Somebody told me it may be the cable, but the BIOS does recognize the drive.
Thanks in advance for your help!
by sgt_shultz Accepted solution
i wonder if you are getting fooled by it appearing as though caused by the second drive. are you saying if you disconnect the second drive you don't see the problem?
is there a bios update for your old pc and have you applied it?
by hal 9000 Accepted solution
You may need to set the jumper to Slave and the jumper on the original HDD to Master and not rely on the Cable Select option.
But as the unit was working I think that you'll find that you have a Power Supply going bad and with the extra load on it now with the additional HDD it's being overdriven to such an extent that you are beginning to see problems.
What I do when I run into this type of problem is grab a known good Power Supply and test with that it doesn't matter if that Power Supply will fit in the case just as long as you can plug it in and test is good enough. If that works and you can fit that PS into the case change the PS and if the PS will not fit the case you'll need to find one that will and deliver enough power.
I've recently had a rash of PS failing and they have all been cheap no name types which have got full of dust and other rubbish so it might be worth a look there as well.
Col
by peterdehoogh Accepted solution
Hi, thanks for your answer. I'll try what you suggested. I cleaned the computer recently and it was full of dust so you might be right. I'll let you know if it worked.
Greetings,
Peter
by peterdehoogh Accepted solution
Hi,
When I disconnect the second drive the computer works fine!
Where can I find a bios update?
Thanks!
by hal 9000 Accepted solution
The M'Board makers Web Site and download the latest BIOS Update available.
If this is something like a Dell they have a long production run with different hardware used so you may need to enter a Serial Number so that you get the right Drivers to suit your M'Board.
When attempting to Flash any BIOS if you get a message that you have the wrong BIOS for that M'Board stop immediately and do not continue attempting to change the BIOS as all that you will achieve is to destroy the M'Board if it's one of the new ones with Soldered on BIOS Chip or you'll need to replace the BIOS Chip if it's in a socket.
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending