I'll just limit my answer to your first question.
[i]1. In my lab in one of the system ,the screen comes as with the following message Windows safe mode,Windows Starting Normally etc & when I choose any of these options ,the system stops.Its doesnt loading the OS windows XP. How to fix this.[/i]
The problem here is that something has gone wrong. Yea I know it's an [b]Obvious Answer[/b] but none the less it is the correct answer. What you need to do here is to work out if it is a Hardware or Software problem and then proceed to fix what has gone wrong.
The easiest way to see if it is Hardware or Software is to use a Different OS and this is very easy you can use a Live Linux which runs off the CD that is placed into the Optical Drive and provided that you do not chose to install it, it has no effect on the existing OS.
If this works correctly you know you have a Software Problem but you need to access the HDD and read Data Off it before shutting down.
I recommend Knoppix as a Live Linux which is available here to download free
http://www.knopper.net/knoppix-mirrors/index-en.html
If the computer fails to work correctly you then need to do some testing of Hardware and for this the Ultimate Boot CD is probably the best option it is available free here
http://www.ultimatebootcd.com/download.html
This will allow you to Test all of the installed Hardware in the computer and find any faulty bits.
If the system works correctly on a Live Linux you have a Windows Problem and the easy fix is to perform a In Place Install by following the Directions here on M$ Web Site. Though to do this you do need a M$ Branded Install Disc not a System Makers Recovery Disc.
http://www.ultimatebootcd.com/download.html
Col