Question Locked

Problem in Static Routing

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I am using Boson router simulator.i have configured static routing.
Take look at my network.
2 two same model router
2 same model switch,
2 PC's

i have connected router-switch-PC by ethernet.
router1-router2 connected by serial link.
The problem is i am able to ping router1 from pc2 but not able to do vice versa...

both ethernet and serial interface are up.static route commands given properly.

so help me to find the problem.
if u want,i can provide router configuration.

3 replies

by thumbsup2

Not sure why you have two routers in this set up. But yes, you will need to provide router configuration (hiding 4th octets if you wish).

by dharmu.iint

sir i have a problem in a static routing . i use same device router and configuration is all right but the ping is not came to first router serial to another router serial my routin working on c class router (192.168.10.0)
the first router serial0 addresss is 192.168.10.1 and second router connected by serial s1 ip add 192.168.10.2 .
the 2600 series router use by me and switch connected by router eithernet and network ( 10.0.0.0 and 11.0.0.0) and ip route given by me on first router - ip route 11.0.0.0 255.0.0.0 192.168.10.2
and second router ip route is - 10.0.0.0 255.0.0.0 192.168.10.1
after this configuration the ping is not came

sir plz send me reply soon ...... iam waiting your answer............

This discussion is closed to new replies.