Here I'll explain the error message you are seeing.
[i]ID: 1
Mode: 1x2 Mirror
Size: 80026M
Track-Mapping: 9729/255/63
Status: Off Line[/i]
This identifies the Drive the RAID the size of the drives in the array and tels you that one of the drives has failed. So you are told that Drive 1 is the problem, you have a 2 Disc Mirror Array, The size of the Disc's in the array is 80026 MEG and that The Drive has failed by the last entry above.
[i]Problem is detected with Array: 1[/i]
In your case this is unnecessary as you only have the one array installed but if you have several different Arrays this would tell you which of the Arrays had a dead drive.
[i]Press to enter FastBuild (tm) Utility or
Press to continue booting...[/i]
This tells you how to proceed to repair the Array after in this case the failed drive has been replaced by pressing the Ctrl - F keys or to press ESC Key to allow the system to boot.
If you allow the system to boot you run the risk of loosing all your Data as one drive has already failed so the other one is likely to have suffered some damage if they where both fitted at the same time. However if one of the rives has already been replaced the other original Drive has now died following the first one failing.
Col