Question Locked

problem joining 2003 domain with vista business

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
massage:An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resolve DNS names in the target domain, I have disable all security features and firewall & TCP/IPV6

9 replies

by rob miners

your DNS server to connect to it wont work if you are trying to use your ISP. You may have to manually enter it.

Open Network and Sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then clicking Network and Sharing Center.

Check that network discovery is enabled along with anything else that you may need.

You may have to lower the authentication level Vista uses by following the directions below.

Click Start, Run and type secpol.msc and press Enter, run it as administrator if required.

Under Local Policies\Security Options

By right clicking and selecting Properties, change the value of Network Security: LAN Manager authentication level from Send NTVLM2 responses only to LM and NTLM - use NTLMv2 session security if negotiated. Click OK and exit out, restart the PC.

by nanao1111us

I did all and also enter the dns server 192.168.1.1. manualy also entererd DNS suffix receives error " the network path can not be found"
I have a linksys router and using the dns ip addresss 198.168.1.1 provided by the router

by nanao1111us

what got to do with file server, I am trying to join a vista client to a domain, that is the issue

by rob miners

you connected to this domain. Go to one and do an ipconfig to get the relevent information and use it to go by. I always thought that a Domain was setup on a file server.

by nanao1111us

I have another windows xp client computer connected to the domain with no problems, I checked the settings in ipconfig, still the vista client cannot connect to the domain

by cg it

DNS couldn't resolve the name. So if your not using the correct DNS servers on the client, then the client won't be able to find the domain DC to authenticate with.

As the error message states, verify that the client is configured to reach the DNS server that can resolve the name in the target domain.

Did you verify that you are using the correct DNS server for the domain in which you are trying to join?

by nanao1111us

i did verified the dns server on both the domain and the client # 192.168.200.200
I use the add/remove windows to configure the dns, I did forget to tell you I received another error " network path cannot be found"
may be kI need to rename the vista client computer and aslso cjange it at the domain?

This discussion is closed to new replies.