Question Locked

Problems with a Dell AC Adaptor PA-1900-02D

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My building was hit by lightning whilst my computer was connected to the AC power supply and after this incident the battery started losing power, although the computer would still run off the adaptor. As the adaptor still seemed to work I thought the problem must be with the battery so I purchased a new one through Dell. (Or is that Delli now days?)
The battery arrived semi-charged but lost its charge within a few days even though I was connected to the AC adaptor.
I cannot understand how the adaptor can power the computer but not the recharge the battery.
Dell just say, you need to buy a new adaptor, which I will do, but I would like to understand the cause of the problem. Any suggestions?

3 replies

by mjd420nova

The ac adapter supplies a voltage that is converted by a samll circuit that supplies voltage to the unit when no battery is installed and also takes some of the voltage through a circuit to charge the battery. In some cases, this charging current is also protected with a small fuse and this may have blown out. The fuse protects the unit from supplying too much current in the case of a bad battery, much like the smoking battery problem that Sony has had. If a new adapter doesn't solve the problem, which I suspect it won't, the converter has failed.

by nbright1

Your mention of this charging circuit is exactly as I imagined it. I suppose it's too much to ask if the fuse can be changed?
Thanks again.

This discussion is closed to new replies.