Discussion Locked

problems with Linksys wifi and 8 port

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am having problems connected a combo 4 port / Wifi LinkSys hub to an 8 port linksys hub. The 8 port feeds 8 home-run network connections, and I am trying to just connect the combo 4 port hub to the wall jack that is fed from one of those 8 connections. Intermittently, the addressing seems to get lost, and the wireless hub loses connection. I have verified that the wireless combo hub does work if it is wired directly to the cable modem feeding my home office, but I am wondering how to configure the LinkSys wireless hub to work together with the 8 port hub and have both wireless and hard wired connections throughout my home office.

Thanks!

2 replies

by rboyer

Check the uplink ports on the hubs. If they are hubs there should be an uplink port to connect hub to hub. If they are switchs, it shouldn't matter. You might try to plug the 4 port into the uplink port on the 8 port hub.

This discussion is closed to new replies.