Networks

Ask something
Discussion Locked

Q: VPN Server Setup

0 helpful
1 reply

by theb

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Win2k3 Server as the AD,DNS,and DHCP servers with the following internal IP's 192.168.2.30 and 192.168.2.101. I need to setup a VPN server and the network is already mapped for this but the VPN server is suppose to use the .101 IP. Do I just change the .101 IP on the win2k3 server to something else?

Also, is it safe or good to the Win2k3 server as the Cert Authority server as well?

The soon to be VPN server will be running win2k3 sbs server. The IAS server will reside in the VPN server as well.

any help would be appreciated.

1 reply

by daniel

Please clarify:

Right now you are NOT using the win2k3 server at 192.168.2.30 and 192.168.2.101 as a VPN server, but you would like to?

And then when you aquire another server running w2k3 sbs you would like to use it instead of the other one?

When you say the network is "mapped for this" are you referring to some port forwarding in your router?

This discussion is closed to new replies.