Can you give a little better example of the environment you are in and where you are looking to deploy QoS. Also, what HW platforms are you running on the cisco side and on the Nortel side (aside from the IP2004s). Is it a CS1KE or IPGW like the 2100? What release, etc.
I am working on a similar situation here and can share some experiences with our CS1kE + CS1000Bs and IP2004/IP1140s. Due to the design of our network we have not needed to implement QoS to ensure the proper priority to voice when contention occurs up until now. We are deploying a few locations where a CS1kB would be appropriate but do not have the funding. In these cases, the MetroE connection will be carrying a significant amount of data, call signaling and all the RTP streams for 99% of the calls from approx 40 users. This is a significant difference from the configuration we use at our 1000B sites where we provide dedicated PSTN access at each location and the MetroE is only carrying signaling, 5 digit from main, MoH and data. Due to the nature of their calling the majority of network traffic is pushed in and out of the PSTN local to the branch even when the phones are registered to the CS1KE so QoS is not really needed but is a good idea and will be implemented shortly.
Any more info from your side would be helpful. Also, the Nortel DSCP values are configurable in element manager and pushed to the sets by the sig servers. Do you run the phone system as well as the data network or are you working with the telecom folks jointly.
~j