Question Locked

quad-monitor

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HI everyone....
my friend is traying to have 4 monitor install to one system and i want to help but is not working, he have 2 display card install on the system(window xp)but only one works.
1- radeon 7000 series
2- nvidia GeForce 7100 gs
3- 4 lcd monitor
4- windows xp pro
when the nvidia is running the radeon shows with the yellow exclamation sign on it. can the quad monitoring be done with what i have or i will need something else. please help will be greatly apriciate.

8 replies

by langlier

But realize that you arent going to get great resolution on any of them.

Also realize that you will need a fairly beefy (I wouldn't got less then 400 watts) Power supply.

you neglect to mention the card types and motherboard. Likely you will be using 1 AGP/PCI-E card and 1 PCI card both of which will have dual outputs. You will need to diable any onboard cards.

Then I recommend making sure the cards are from the same manufac to eliminate any driver issues.

Get the latest drivers for both cards and configure them using the ATI or GeForce interface.

by eldurisimo2000

thank you guys for your fast answer.
i will try to return one othe the card to make it both from the same manufac to eliminate any conflic between them and also will desable the onboard card. again thanks alot and i hope that works.

by jiayi_chao

It could be that you have driver conflicts since you have two totally different chipsets. If you can borrow another nVIDIA card you could easily test this theory out. At work we have a 5 monitor setup but all the graphics chipsets are nvidia and are using unified drivers.

by dr dij

quite a few video cards support 4 monitors.
matrox for example. Matrox can even make one video signal on a pc you cna't put new vid car d in (e.g. laptop) itno twomonitors.

this page at multiplemonitors.org lists monitors that support 3rd and 4th head. the matrox site show support stands for 4 at once in 2x2 and other configs.

http://www.multiplemonitors.org/Pages%20-%20Hardware/Hardware%20-%20Multi%20head%20Video%20cards.html

by langlier

but most pci-e and agp cards have 2 mon outputs standard and its cheaper and easier to pick up a 2nd pci card most often.

by scratchi

I saw the same problem when I was setting this up (the ! mark one the pci card).

Needed to go into the BIOS and ensure it's not using the PCI-E card as the primary one. The 2 cards worked together after making that change and i was able to use 3 monitors.

I used 1 PCI-E ATI Card and one PCI ATI card.

Hope this helps, have fun :)

by fahd_ca

I have the following:
2*LCD Monitors
2*LCD Tv's

My monitors are setup as an extended desktop.

I want to clone whatever is seen on the monitors, to the tv's.

So whatever Monitor A shows, TV A will also show. i.e.:

Monitor A display = TV A display
Monitor B display = TV B display

Monitor A & B are setup in an extended desktop.

I'm going crazy trying to figure this out. I really think i'm the first person ever to try this.

THANKS TO ANYONE WHO CAN HELP!!

This discussion is closed to new replies.