4 replies
by compsrv Accepted solution
by scott_heath Accepted solution
If you are creating the RAID using hardware (RAID controller based) it will depend on your software. If you are doing it in Windows you'll need to be booting off another drive. I belive you can mirror the boot partition, but you can't srtipe it.
Also, if you are using hardware you'll be wasting a ton of space as the partition can only be as big as the smallest drive. It's normally suggested to use identical drives.
Regards,
Scott
by compsrv Accepted solution
by scott_heath Accepted solution
Is this going to be hardware raid or software raid?
Regards,
Scott
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending