Question Locked

RAID setup

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have IBM x3400 server with 3 drives, can someone advise on how best to setup RAID on this server. Server will be used for data/files only with Windows 2003 as OS.

6 replies

by chris cook

I would agree with the RAID 5 suggestion. If you had 2 more drives, I would suggest a RAID 1 and 5. On my DB servers, I setup a RAID 1 configuration for the OS and Applications. All data is stored within the RAID 5 configuration.

by bart777

Your only other choice with 3 drives is a RAID 1 with a hot spare. While this would be a great fail-over you effectively lose 2 of your 3 disks to redundancy. That's just not good a good idea if you are only doing data storage.

Obviously make sure that the backup stratagy is in place as well in the event of a 2 disk failure. (Yes they do happen)

Best of luck

by liame

Or if you are feeling lucky you could try a 3 disk raid 0 for great performance. Great performance and you get that "am I going to lose everything today" buzz every time the server sneezes!

Seriously though.... raid 5.

by bart777

I needed a good laugh today.

Ooooooo, what a buzz!!!!!!!!!!!!!!!!

This discussion is closed to new replies.