Question Locked

Raid5 recovery

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a dell server that has 3 74Gb scsi disks on raid5, and today 2 of the disk are physicaly failing(doing crump noise), is there a way to recover my data.

3 replies

by Former member

In a RAID 5 data is also striped across all disks in a rotating pattern but with parity data for redundancy. A RAID 5 with three 20-GB disks will function as a single 40-GB logical disk. Parity data uses up the equivalence of one disk.

A RAID 5 becomes degraded when one disk fails. The RAID, however, still functions because the data on the failed disk can be regenerated using the parity data on the remaining disks.
Some arrays are "redundant" in a way that writes extra data derived from the original data across the array organized so that the failure of one (sometimes more) disks in the array will not result in loss of data; the bad disk is replaced by a new one, and the data on it reconstructed from the remaining data and the extra data. A redundant array obviously allows less data to be stored; a 2-disk RAID 1 array loses half of its capacity, and a RAID 5 array with several disks loses the capacity of one disk.

How many disks have you in your Raid 5 lay out?. If you have more than three in Raid 5, you will have a good chance of your retrieval of files.
Info for recovery software:
http://www.freedownloadscenter.com/Utilities/File_Maintenance_and_Repair_Utilities/Quick_Recovery_for_RAID_5___A_Data_Recovery_Software.html

Please post back if you have any more problems or questions.

by computechdan

there are no end user options for recovery of of two failed disks in a three disk raid 5

the only option at this point is a professional recovery company

This discussion is closed to new replies.